Effects of iron(III)chelates on the solubility of heavy metals in calcareous soils

In this study I evaluated the effects of complexing agents on the solubility of heavy metals in an incubation experiment up to 56 days when complexing agents were applied as Fe-chelates (Fe-EDDS(S,S), Fe-EDDS(mix), Fe-EDTA and Fe-EDDHA) on calcareous soils at a level sufficient to correct Fe chlorosis (0.1 mmol kg⁻¹). Of these ligands, EDDHA was the most efficient in keeping Fe in water-soluble form, and EDDS increased the solubility of Cu and Zn most, and only EDTA increased the solubility of Cd and Pb. EDTA increased the solubility of Ni steadily during the incubation period, equalling about 5-8% of the added EDTA concentration. [S,S]-EDDS was biodegraded within 56 days, whereas EDDS(mix) was less biodegradable. Ni-chelates were the most recalcitrant against biodegradation. The study shows that even a moderate input of chelates to soil increases the solubility of toxic heavy metals and their risk of leaching.     

Ensemble Modeling of the Baltic Sea Ecosystem to Provide Scenarios for Management

We present a multi-model ensemble study for the Baltic Sea, and investigate the combined impact of changing climate, external nutrient supply, and fisheries on the marine ecosystem. The applied regional climate system model contains state-of-the-art component models for the atmosphere, sea ice, ocean, land surface, terrestrial and marine biogeochemistry, and marine food-web. Time-dependent scenario simulations for the period 1960–2100 are performed and uncertainties of future projections are estimated. In addition, reconstructions since 1850 are carried out to evaluate the models sensitivity to external stressors on long time scales. Information from scenario simulations are used to support decision-makers and stakeholders and to raise awareness of climate change, environmental problems, and possible abatement strategies among the general public using geovisualization. It is concluded that the study results are relevant for the Baltic Sea Action Plan of the Helsinki Commission.     

Landsat ETM+ Images in the Estimation of Seasonal Lake Water Quality in Boreal River Basins

We investigated the use of Landsat ETM+ images in the monitoring of turbidity, colored dissolved organic matter (CDOM), and Secchi disk transparency (Z(SD)) in lakes of two river basins located in southern Finland. The ETM+ images were acquired in May, June, and September 2002 and were corrected for atmospheric disturbance using the simplified method of atmospheric correction (SMAC) model. The in situ measurements consisted of water sampling in the largest lake of the region, routine monitoring results for the whole study area, and Z(SD) observations made by volunteers. The ranges of the water quality variables in the dataset were as follows: turbidity, 0.6-25 FNU; absorption coefficient of CDOM at 400 nm, 1.0-12.2 m(-1); Z(SD), 0.5-5.5 m; and chlorophyll a concentration, 2.4-80 mug L(-1). The estimation accuracies of the image-specific empirical algorithms expressed as relative errors were 23.0% for turbidity, 17.4% for CDOM, and 21.1% for Z(SD). If concurrent in situ measurements had not been used for algorithm training, the average error would have been about 37%. The atmospheric correction improved the estimation accuracy only slightly compared with the use of top-of-atmospheric reflectances. The accuracy of the water quality estimates without concurrent in situ measurements could have been improved if in-image atmospheric parameters had been available. The underwater reflectance simulations of the ETM+ channel wavelengths using water quality typical for Finnish lakes (data from 1113 lakes) indicated that region-specific algorithms may be needed in other parts of the country, particularly in the case of Z(SD). Despite the limitations in the spectral and radiometric resolutions, ETM+ imagery can be an effective aid, particularly in the monitoring and management of small lakes (<1 km(2)), which are often not included in routine monitoring programs.     

Silvicultural management in maintaining biodiversity and resistance of forests in Europe-boreal zone: case Finland

The majority of untouched natural boreal forests have been regenerated through large catastrophes, occurring by intervals between 50 and 100 years. Storm and fire will open the landscape, result in a huge amount of dead or dying trees and let the pioneer tree species germinate. These processes are the guideline for Finnish forest management today.The main focus by maintaining the biodiversity in Finnish boreal forest zone is directed to managed forests. Nature-orientated silviculture on stand level is practised. The site type classification, a reflection of the modern concept of biodiversity and developed by Cajander early in 1900s, on the basis of natural vegetation composition of the site, has the central role by choosing tree species, regeneration methods and thinning procedure, and reflects also on the site productivity. The small size of stands, the abundance of natural seedlings in planted stands and the popularity of mixed stands have a positive impact on biodiversity of forests. The protection of small-sized valuable habitats in commercially managed stands, the leaving of retention trees standing and lying in the forest in all phases of the rotation, are activities made for biodiversity. Many insects and fungi are adapted to catastrophes and so they can survive in single stems left on regeneration areas. Maintaining the biodiversity in multifunctional forests is also supported by the new forest legislation and by the criteria of Finnish Forest Certification System.     

The Use of a Simple Air Quality Index in the Helsinki Area, Finland

2 (1 and 24 h), SO₂ (1 and 24 h), O₃ (1 h) and PM₁₀ (24 h). The AQI is linked to the new air quality guidelines in Finland. The AQI is based on acute health effects, but long-term effects on nature and materials are also taken into consideration. Subindices are calculated hourly for all pollutants and for a given hour the highest subindex becomes the AQI. AQI values are currently calculated for the center of Helsinki and for typical suburban areas.     

Accumulation and depuration of cyanobacterial toxin nodularin and biomarker responses in the mussel Mytilus edulis

Blue mussels (Mytilus edulis) were exposed to an extract made of natural cyanobacterial mixture containing toxic cyanobacterium Nodularia spumigena (70-110 microg nodularin l(-1), 24-h exposure followed by 144-h depuration period in clean water). Toxin concentration increased from initial 400 to 1100 mg kg(-1) after 24-h exposure, measured by liquid chromatography/mass spectrometry (LC/MS). Acetylcholinesterase activity (AChE), a biomarker of direct neurotoxic effects, showed inhibition after 12 and 24h exposure but returned to control level during the depuration period. Catalase (CAT) activity, an indicator of oxidative stress, showed significantly elevated levels in exposed mussels but only 72 h after the end of the exposure. No change in the activity of glutathione-S-transferase (GST) involved in conjugation reactions could be observed. A gradual yet incomplete elimination of nodularin (from 1100 to 600 mg kg(-1)) was observed during the depuration period, and the tissue levels were 30% lower in clean water after 24 h. The observed increase in oxidative stress indicated by elevated CAT activity is likely connected to detoxification reactions leading to the production of reactive oxygen species, including an apparent time lag in this specific enzymatic defence response. That no change in GST activity was observed suggests that this enzyme is not significantly involved in the detoxification process of nodularin-containing cyanobacterial extract in M. edulis.     

Long-term environmental monitoring for assessment of change: measurement inconsistencies over time and potential solutions

The importance of long-term environmental monitoring and research for detecting and understanding changes in ecosystems and human impacts on natural systems is widely acknowledged. Over the last decades, a number of critical components for successful long-term monitoring have been identified. One basic component is quality assurance/quality control protocols to ensure consistency and comparability of data. In Norway, the authorities require environmental monitoring of the impacts of the offshore petroleum industry on the Norwegian continental shelf, and in 1996, a large-scale regional environmental monitoring program was established. As a case study, we used a sub-set of data from this monitoring to explore concepts regarding best practices for long-term environmental monitoring. Specifically, we examined data from physical and chemical sediment samples and benthic macroinvertebrate assemblages from 11 stations from six sampling occasions during the period 1996–2011. Despite the established quality assessment and quality control protocols for this monitoring program, we identified several data challenges, such as missing values and outliers, discrepancies in variable and station names, changes in procedures without calibration, and different taxonomic resolution. Furthermore, we show that the use of different laboratories over time makes it difficult to draw conclusions with regard to some of the observed changes. We offer recommendations to facilitate comparison of data over time. We also present a new procedure to handle different taxonomic resolution, so valuable historical data is not discarded. These topics have a broader relevance and application than for our case study.     

A comparison of tools for modeling freshwater ecosystem services

Interest in ecosystem services has grown tremendously among a wide range of sectors, including government agencies, NGO’s and the business community. Ecosystem services entailing freshwater (e.g. flood control, the provision of hydropower, and water supply), as well as carbon storage and sequestration, have received the greatest attention in both scientific and on-the-ground applications. Given the newness of the field and the variety of tools for predicting water-based services, it is difficult to know which tools to use for different questions. There are two types of freshwater-related tools – traditional hydrologic tools and newer ecosystem services tools. Here we review two of the most prominent tools of each type and their possible applications. In particular, we compare the data requirements, ease of use, questions addressed, and interpretability of results among the models. We discuss the strengths, challenges and most appropriate applications of the different models. Traditional hydrological tools provide more detail whereas ecosystem services tools tend to be more accessible to non-experts and can provide a good general picture of these ecosystem services. We also suggest gaps in the modeling toolbox that would provide the greatest advances by improving existing tools.     

使用Xevo TQ-S和APGC(大气压气相色谱)大幅降低二噁英分析中的样品残留

当有机化合物在含有氯的环境下燃烧时,会产生二噁英和呋喃,例如聚氯乙烯(PVC)生产、纸张漂白过程,以及火山爆发等自然原因.二噁英是剧毒物质,并且具有亲脂性,很容易在多种动物体内积累.它们还是潜在的诱变剂和致癌物质.2,3,7,8-四氯二苯并二噁英(TCDD)结构如下:Xevo TQ-S和大气压气相色谱(APGC)组成了一个非常灵敏的检测系统,可以准确测定出限制浓度的二噁英和呋喃.在分析未知浓度的样品时,可能会检测到浓度非常高的化合物.因此,目标化合物的存在会对下一次进样造成样品残留,进而导致定量结果有误.